Amagama angaqhelekanga emveliso
- Ipeyinti ye-alkyd, i-alkyd top coat, i-alkyd coat, i-alkyd anti-corrosion coat, i-alkyd anti-corrosion top coat, i-alkyd magnetic top coat.
Iiparameter ezisisiseko
| Igama lesiNgesi lemveliso | Ipeyinti ye-alkyd |
| Igama lemveliso yesiTshayina | I-Alkyd topcoat |
| Iimpahla Eziyingozi Inombolo | 33646 |
| Inombolo ye-UN | 1263 |
| Ukuguquguquka kwe-organic solvent | Imitha esemgangathweni engama-64³. |
| Uphawu | Ipeyinti yeJinhui |
| Inombolo yoMzekelo | C52-5-2 |
| Umbala | Inemibala |
| Umlinganiselo wokuxuba | Icandelo elinye |
| Inkangeleko | Umphezulu ogudileyo |
Ukwakheka kwemveliso
- I-Alkyd topcoat yi-topcoat eyenziwe yi-alkyd resin, izongezo, i-No.200 solvent petrol kunye ne-mixed solvents, i-catalytic agent njalo njalo.
Unyango Lomphezulu
1. Ipeyinti yefilimu echasene nokutshixa, ukusebenza kakuhle kokukhusela, ukukhanya okuhle kunye nokugcina umbala, umbala oqaqambileyo, ukuqina okuhle.
2. Ukunamathela kakuhle kwisinyithi, umthi, kwaye kunomlinganiselo othile wokumelana namanzi, ukumelana namanzi anetyuwa.
3. Ifilimu yepeyinti iqinile, ivalekile kakuhle, isebenza kakuhle ekulweni nomhlwa, inokumelana nefuthe lobushushu.
4. Inokumelana kakuhle nemozulu, ukukhazimla kunye nobunzima.
5. Umbala ophezulu, ukusebenza kakuhle kokusila.
6. Ukunamathela okuqinileyo, iipropati ezilungileyo zoomatshini.
7. Ukusebenza kakuhle kolwakhiwo.
8. Amandla okugcwalisa aqinileyo.
Iiparameter zobugcisa: GB/T 25251-2010
- Imeko kwisikhongozeli: akukho maqhuqhuva aqinileyo emva kokuxuba nokuxuba, kwimeko efanayo
- Ubunzima: ≤40um (isalathisi esiqhelekileyo: GB/T6753.1-2007)
- Umxholo wezinto ezingaguqukiyo: ≥50% (isalathisi esiqhelekileyo: GB/T1725-2007)
- Ukumelana namanzi: iiyure ezi-8 ngaphandle kokuqhekeka, ukudumba okanye ukuxobuka (Isalathisi esiqhelekileyo: GB/T9274-88)
- Ukumelana namanzi anetyuwa: 3% NaCl, iiyure ezingama-48 ngaphandle kokuqhekeka, ukudumba nokuxobuka (Isalathisi esiqhelekileyo: GB/T9274-88)
- Ixesha lokomisa: ukomisa umphezulu ≤ iiyure ezi-8, ukomisa okuqinileyo ≤ iiyure ezingama-24 (isalathisi esiqhelekileyo: GB/T1728-79)
Unyango lomphezulu
- Unyango lwentsimbi yokuqhumisa isanti kumphezulu ukuya kwi-Sa2.5 grade, uburhabaxa bomphezulu buyi-30um-75um.
- Ukususwa komhlwa kwezixhobo zombane ziye kwizinga le-St3.
Ukusetyenziswa
- Isebenza kumphezulu wentsimbi, umphezulu woomatshini, umphezulu wepayipi, umphezulu wezixhobo, umphezulu wentsimbi wangaphakathi nangaphandle kunye nokukhuselwa kunye nokuhonjiswa komphezulu womthi, yipeyinti esetyenziswa ngokubanzi, esetyenziswa kakhulu kulwakhiwo, oomatshini, izithuthi kunye namashishini ahlukeneyo okuhombisa.
Ukwakhiwa kwepeyinti
- Emva kokuvula ibhere, kufuneka ixutywe ngokulinganayo, ishiywe ime, kwaye emva kokuba ivuthiwe imizuzu engama-30, yongeza ubungakanani obufanelekileyo be-thinner kwaye ulungelelanise i-viscosity yokwakha.
- I-Diluent: i-diluent ekhethekileyo yochungechunge lwe-alkyd.
- Ukutshiza okungenamoya: Ubungakanani bokuxutywa yi-0-5% (ngokomlinganiselo wobunzima bepeyinti), umlinganiselo we-nozzle yi-0.4mm-0.5mm, uxinzelelo lokutshiza yi-20MPa-25MPa (200kg/cm²-250kg/cm²).
- Ukutshiza ngomoya: Ubungakanani bokuxutywa yi-10-15% (ngokomlinganiselo wobunzima bepeyinti), umlinganiselo womlomo yi-1.5mm-2.0mm, uxinzelelo lokutshiza yi-0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Ingubo yerola: Ubungakanani bokuxutywa yi-5-10% (ngokwemilinganiselo yobunzima bepeyinti).
Ukulumkela
- Kwixesha lobushushu obuphezulu, kulula ukomisa isitshizi, ukuze kuthintelwe isitshizi esomileyo, sinokulungiswa ngesitshizi esincinci de singatshisi.
- Le mveliso ifanele isetyenziswe ngabasebenzi abapeyintayo abaziingcali ngokwemiyalelo ekwiphakheji yemveliso okanye kule ncwadi yemiyalelo.
- Lonke ugquma kunye nokusetyenziswa kwale mveliso kufuneka kwenziwe ngokuhambelana nayo yonke imigaqo nemigangatho efanelekileyo yempilo, ukhuseleko kunye nokusingqongileyo.
- Ukuba unamathandabuzo malunga nokuba uza kuyisebenzisa na le mveliso okanye awuyisebenzisi, nceda unxibelelane nesebe lethu leenkonzo zobugcisa ukuze ufumane iinkcukacha.
Ukupakisha
- Idrama engama-25kg
Ukuthuthwa kunye nokugcinwa
- Imveliso mayigcinwe kwindawo epholileyo nengena umoya, ithintelwe elangeni ngqo, kwaye ibekwe kude nemithombo yokutshisa, kude nemithombo yobushushu ekwindawo yokugcina impahla.
- Xa kuthuthwa imveliso, kufuneka ithintelwe emvuleni, ekuchatshazelweni lilanga, kuthintelwe ukungqubana, kwaye kufuneka ithobele imigaqo efanelekileyo yesebe lezendlela.
Ukhuseleko loKhuseleko
- Indawo yokwakha kufuneka ibe neendawo zokungenisa umoya ezifanelekileyo, kwaye abapeyinti kufuneka banxibe iiglasi, iiglavu, iimaski, njl.njl. ukunqanda ukudibana nolusu kunye nokuphefumla inkungu yepeyinti.
- Umsi nomlilo akuvumelekanga ngokungqongqo kwindawo yokwakha.
Imibuzo Ebuzwa Rhoqo Ngumthengi
● Ngaba kulula ukupenda i-topcoat emhlophe nenombala okhanyayo emva kokusebenzisa i-Iron Red anti-rust?
A: Hayi, akulula, kufuneka ufake ezinye iingubo ezimbini ze-topcoat.
● Ngaba i-topcoat ingafakwa kwiplastiki, i-aluminium kunye neendawo ezine-galvanized?
A: Ii-enamel ze-alkyd eziqhelekileyo azinakusetyenziswa kwiindawo ezingentla.
