Imveliso eyaziwa ngokuba
- Ipeyinti ye-alkyd ferro-alkali antirust, i-alkyd ferro-alkali ipeyinti ephakathi, ialkyd ferro-alkali isithinteli sokutyabeka, ipeyinti ephakathi yealkyd, ipeyinti yealkyd ferro-alkali.
Iiparamitha ezisisiseko
| Igama Product IsiNgesi | Ukwaleka kwealkyd |
| Iimpahla ezinobungozi No. | 33646 |
| INombolo ye-UN. | 1263 |
| Ukuguquguquka kwe-solvent ye-Organic | 64 yeemitha ezisemgangathweni³. |
| Uphawu | Jinhui Coating |
| Umzekelo No. | C52-2-5 |
| Umbala | Ngwevu |
| Umlinganiselo wokuxuba | Icandelo elinye |
| Imbonakalo | Umphezulu ogudileyo |
Ukuqulunqwa kwemveliso
- I-alkyd yokugquma i-medium coating yenziwe nge-alkyd resin, i-mica iron oxide, i-antirust pigment filler, i-additives, i-No.
Iimpawu
- Ifilimu yepeyinti echasene ne-chalking, ukusebenza kakuhle kokukhusela, ukugcinwa kakuhle kokukhanya kunye nokugcinwa kombala, umbala oqaqambileyo, ukuqina okulungileyo.
- Ifilimu yepeyinti iqinile, itywinwa kakuhle, intsebenzo ebalaseleyo yokuchasana nomhlwa, inokumelana neempembelelo zomahluko wobushushu.
- Ukusebenza kakuhle, ukudibanisa okulungileyo kunye ne-alkyd primer kunye ne-alkyd top coat.
- Umxholo we-pigment ephezulu, ukusebenza kakuhle kwesanti.
- Ukubambelela okuqinileyo, iimpawu ezintle zoomatshini.
- Ukusebenza kakuhle kolwakhiwo.
- Ukukwazi ukuzalisa okunamandla.
Ukupakisha
- 25kg igubu
Iiparamitha zobugcisa: GB/T 25251-2010
- Ubume kwisitya: akukho zigaqa ezinzima emva kokuvuselela kunye nokuxuba, kwisimo esilinganayo.
- Ukubambelela: iklasi yokuqala (isalathisi esiqhelekileyo: GB/T1720-1979(89))
- Ukulunga: ≤60um (isalathisi esiqhelekileyo: GB/T6753.1-2007)
- Ukuxhatshazwa kwamanzi etyuwa: i-3% ye-NaCl, i-48h ngaphandle kokuqhekeka, i-blistering, i-peeling (isalathisi esiqhelekileyo: GB / T9274-88)
- Ixesha lokumisa: ukomisa ubuso ≤ 5h, ukomisa okuqinileyo ≤ 24h (isalathisi esiqhelekileyo: GB / T1728-79)
Unyango lomphezulu
- Steel surface sandblasting unyango ukuya kwibakala Sa2.5, uburhabaxa umphezulu 30um-75um.
- Izixhobo zombane ziyehla ukuya kwibanga le-St3.
Ukuthelekisa ikhosi yangaphambili
- Ipeyintwe ngokuthe ngqo kumphezulu wentsimbi omgangatho wayo wokususwa komhlwa ufikelela kwinqanaba le-Sa2.5, okanye ipeyintwe kumphezulu we-alkyd primer.
Ukuthelekisa ikhosi yangasemva
- Ipeyinti ye-Alkyd.
Iiparamitha zokwakha
| Ubukhulu befilimu ecetyiswayo | 60-80um |
| Inani elicetyiswayo leedyasi | Iidyasi ezi-2-3 |
| Ubushushu bokugcina | -10 ~ 40℃. |
| Ubushushu bokwakha | 5 ~ 40℃ |
| Ixesha lovavanyo | 6h |
| Indlela yokwakha | Ukuxubha, ukutshiza umoya, ukuqengqeleka kungasetyenziswa. |
| Idosi yethiyori | malunga ne-120g/m² (esekelwe kwifilimu eyomileyo ye-35um, ngaphandle kwelahleko). |
| Ixesha lokwaleka
| Ubushushu be-substrate ℃ 5-10 15-20 25-30 |
| Isithuba esifutshane h 48 24 12 | |
| Ikhefu elide kufuneka lingadluli iintsuku ezisi-7. | |
| Ubushushu besubstrate kufuneka bube ngaphezu kwe-3℃ ngaphezu kwendawo yombethe. Xa ubushushu be-substrate bungaphantsi kwe-5 ℃, ifilimu yepeyinti ayiyi kuphiliswa kwaye ayifanelekanga ukwakhiwa. | |
Ukwakhiwa kwepeyinti
- Emva kokuvula umgqomo, kufuneka uxutywe ngokulinganayo, ushiye ukuma kwaye uvuthwe kwi-30min, uze ungeze inani elifanelekileyo le-thinner kwaye ulungelelanise i-viscosity yokwakha.
- I-Diluent: i-diluent ekhethekileyo yochungechunge lwe-alkyd.
- Ukutshiza okungenamoya: Isixa sokunyuswa yi-0-5% (ngokomlinganiselo wobunzima bepeyinti), umthamo wombhobho yi-0.4mm-0.5mm, uxinzelelo lokutshiza yi-20MPa-25MPa (200kg/cm²-250kg/cm²).
- Ukutshiza komoya: Isixa se-Dilution yi-10-15% (ngokomlinganiselo wobunzima bepeyinti), umthamo we-nozzle yi-1.5mm-2.0mm, uxinzelelo lokutshiza yi-0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- I-Roller Coating: Isixa se-Dilution yi-5-10% (ngomlinganiselo wepeyinti yobunzima).
Ukusetyenziswa
- Ifanele imigangatho yentsimbi, imigangatho yomatshini, iindawo zemibhobho, izixhobo zokusebenza, iindawo zokhuni.
Phawula
Ukutshiza okomileyo kunokwenzeka ngexesha lonyaka elishushu:
- Kulwakhiwo lwexesha lobushushu obuphezulu, ukutshiza ngokulula, ukwenzela ukuphepha ukutshiza okomileyo kunokulungelelaniswa ne-thinner de ingomi.
- Le mveliso kufuneka isetyenziswe ngabaqhubi bepeyinti abaqeqeshiweyo ngokwemiyalelo ekwiphakheji yemveliso okanye le ncwadana.
- Konke ukutyabeka kunye nokusetyenziswa kwale mveliso kufuneka kuqhutywe ngokuhambelana nayo yonke impilo efanelekileyo, ukhuseleko kunye nemimiselo yokusingqongileyo kunye nemigangatho.
- Ukuba uyathandabuza malunga nokuba le mveliso kufuneka isetyenziswe, nceda uqhagamshelane nesebe lethu lenkonzo yobugcisa ngolwazi.
UGcino lwezoThutho
- Imveliso kufuneka igcinwe kwindawo epholileyo nengena umoya, ikhuselwe kwilanga elithe ngqo, kwaye yodwa kwimithombo yokutshisa kwaye igcinwe kude nemithombo yobushushu kwindawo yokugcina impahla.
- Iimveliso kufuneka zikhuselwe emvuleni, ekukhanyeni kwelanga kunye nokungqubana xa zithuthwa, kwaye kufuneka zihambelane nemigaqo efanelekileyo yesebe lezendlela.
Ukhuseleko loKhuseleko
- Indawo yokwakha kufuneka ibe neendawo zokungenisa umoya ezifanelekileyo, kwaye abapeyinti kufuneka banxibe iiglasi, iiglavu, iimaski, njl.
- Ukutshaya nomlilo akuvumelekanga ngokungqongqo kwindawo yokwakha.
